Home > Products > Laser Cutting Machine > Fiber Laser Cutting Machine > Economic Fiber Laser Cutter Machine
Economic Fiber Laser Cutter Machine
  • Economic Fiber Laser Cutter MachineEconomic Fiber Laser Cutter Machine
  • Economic Fiber Laser Cutter MachineEconomic Fiber Laser Cutter Machine
  • Economic Fiber Laser Cutter MachineEconomic Fiber Laser Cutter Machine

Economic Fiber Laser Cutter Machine

The SUNNA Economic Fiber Laser Cutter Machine from the Chinese factory has the benefits of excessive processing quality, low buy cost, easy maintenance, handy use, and widely application range.Therefore, this economical fiber laser cutter machine is greater and greater famous at domestic and abroad. This economical fiber laser cutter machine can manner most metallic materials, such as stainless steel, carbon steel, galvanized sheet, etc. Widely used in sheet steel processing, lighting, kitchen utensils, ornamental materials, cupboards and different industries.

Send Inquiry    PDF DownLoad

Product Description

The SUNNA Economic Fiber Laser Cutter Machine from China adopts precision servo motor, excessive precision transmission structure, massive riding torque, small error and exact dynamic performance; exterior protection design, CE standard protection safety  window; Y-axis slide plate is made of cast aluminum, Z Axis integration system: Ergonomic design, sensible operation terminal, pleasant interface, effortless to learn, secure and dependable structure, much less faults, excessive efficiency; built-in faraway auxiliary function, processing equipment faults, enhancing the time effectivity of tools troubleshooting, effectively lowering after-sales provider cost. If you are fascinated in the economic fiber laser cutter machine , welcome to contact us!

Economic Fiber Laser Cutter Machine is a small and medium power laser fiber machine, and its best-selling version is a 1000w 15000w 2000w and 3000w 4000w 6000w fiber laser cutting machine. This machine is not only cheap but also full-featured. It can cut metal plates below 20mm. If your budget is relatively small, then this cheap laser cutter is your best choice.

Product Parameter (Specification)

Model SN-3015F
Laser Power 1.0kw 1.5kw 2.0kw 3.0kw 4.0kw
Working Area SN3015F - 5'W x 10'L
SN4020F - 6'W x 13'L
SN6020F - 6'W x 20'L
Control Software Cypcut Control System
Cutting accuracy 0.01mm
Fiber Laser Head Raytools Cutting head
Gross Power 15KW
Machine Weight 14000KG
Voltage 380V,50Hz
Cutting Gas Compressed air, oxygen, nitrogen
Cooling System WATER COOLING
Automatic Grade Automatic
Phase Three phase
Max. Acceleration 1.5G
Application Mild Steel, Carbon Steel, Stainless Steel, Aluminum, Brass sheet tube cutting
Power Source Raycus/IPG/MAX
Max Running Speed 4000 IPM | 6000 IPM (Optional)
Max.Cutting Speed 30,000mm/min
Autofocus Yes
Cutting Thickness 0 to 20mm (mild steel)
Support File Extension Plt, bmp,dxf, jpg, tif, ai

What is the Maximum Cutting Thickness ?

1KW 1.5KW 2KW 3KW 4KW
CS(mm) 0.4-12 0.4-16 0.4-18 0.4-20 0.4-25
SS(mm) 0.4-5 0.4-6 0.4-8 0.4-12 0.4-12
Aluminum (mm) 0.4-3 0.4-5 0.4-6 0.4-8 0.4-12
Brass (mm) 0.4-3 0.4-5 0.4-6 0.4-6 0.4-8

Industrial Fiber Laser Cutter for metal main feature

1. In the industrial fiber laser metal cutting machine, Raycus generator laser device with stable performance is used; the key parts can last 100,000 hours.

2. A sophisticated CNC control system that can directly read.ai,.plt,.dxf,.lxd, and ug code and is simple to use;

3. Intelligent cutting head with auto-height adjustment for consistent focal length and cutting quality.

4. High precision transmission device imported from Japan that works flawlessly with the servo system, ensuring cutting precision and efficiency.

5. Non-contact processing, smooth incision and no need for secondary rework.

6. Excel at processing complex graphics on different types of metal sheets

Industrial Fiber Laser Cutter for metal main parts


    --The main frame adopts the gantry structure welded by all steel plates to ensure the long-term stability without deformation.

    --Improve the stability and rigidity of the Y-axis beam.

    --Using gantry rack double guide rail, double servo drive structure.

    --Ensure the high precision and high dynamic performance of Y-axis beam movement.

    --Y-axis beam runs smoothly at high speed, greatly reducing gas consumption.


    --The steel serrated table can withstand heavier work pieces and has only a small area to touch the workpiece when cutting, maximizing the melting of the table surface by the heat of the laser.

    --Each piece is independent for easy replacement and maintenance.


    --Support AI, DXF, PLT, Gerber, LXD and other formats, and accept the Cyput international standard G code generated by MaterCam, Type3, Wentai and other software.

    --To use the easiest way to set the lead, slotted compensation, micro connection, bridge-connection, lead inside or outside, lead seal without gap and so on.


    --The guide rail and rack are calibrated by a precision collimator with an accuracy of ±0.02mm

    --Using Taiwan YYC rack, grinding on all sides. And there is a positioning pin design to prevent the rack from shifting

    --Using Taiwan HIWIN guide rail, and use oblique pressure block design to prevent displacement of guide rail


    --AUTOFOCUS: Through the built-in drive unit of the servo motor, the focusing lens is driven by the linear mechanism to automatically change the position in the focusing range.

    --EFFICIENT: Reading the saved cutting parameters through the operating system can quickly change the focus position of the laser head, eliminating manual operation and improving efficiency by 30%


    --We have professional sales and technician who can suggest you the most suitable laser source, depending your target price.

    --Stable performance and high cost performance

    --The fiber launch is stable, with long service life of nearly 100,000 hours

    --It can run continuously 24 hours a day to meet the requirements of industrial continuous production


    All the electrical components are housed and wired in a doubled-doored electrical enclosure. This allows for easy access and service when needed. All wiring is tagged so that when service is required, the customer can easily navigate the cabinet


    Composed of: servo drives and the servos move in all axes.With this motor, the machine can realize high-precision machining at high speed.


    1--The function of the water cooler is to reduce the temperature of the laser generator and prevent the laser from being burned out.We only use brand-name water coolers with reliable quality.

    2--Automatically adjust the temperature according to working environment, no need to change settings parameters;

    3--Intelligent dual temperature dual control mode to satisfy different needs of a fiber laser device and the optics

Applicable Industry and Materials

Fiber Laser Stainless Steel Cutting Machine is suitable for stainless steel, carbon steel, silicon steel, aluminum alloy, titanium alloy, galvanized steel, pickle plate, aluminum-plating Zinc plate, metallic copper and other metals.

Specially used for cutting 0.5-30mm carbon steel sheets (pipes), 0.5-15mm stainless steel sheets, galvanized steel(pipes), electrolytic zinc-coated steel sheet(pipes), silicon steel(pipes) and other kinds of thin metal sheets and pipes. Range of pipe diameters: 20-220mm.

Fiber Laser Cutting Machine After Sales Service:

A.SUNNA INTL will supply fiber laser cutters with training videos and user's manuals in English for installing, operation, maintenance and trouble-shooting, and shall give technical guide by e-mail,whatsapp,wechat,telegram,teamviewer,telephone and so on, when you meet some problems of installation, using or adjusting.

B.You can come to our factory for training. SUNNA will offer professional guide. Direct and effective face-to-face training. Here we have assembled equipments, all sorts of tools and testing facility,we will also provide accommodation during training period. Training Time: 1-10 working days.

C.Engineers service machinery overseas

SUNNA has many years of experience in laser equipment supply, SUNNA is an expert in laser engraving and cutting machines and CNC routers, and has provided thousands of laser machines to customers worldwide. We also support OEM, welcome your inquiry.

Hot Tags: Economic Fiber Laser Cutter Machine, China, Factory, Manufacturers, Suppliers, Wholesale, Customized, In Stock, Cheap, Low Price, Price, CE, 2 years warranty, Newest, Discount

Related Category

Send Inquiry

Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.