1390 Co2 Mixed Cutting Machine for Metal

Metal Mix CO2 Laser Cutter 1390 300W Laser Cutting Machines. Product name: Mixed Cutting Machine C02 Laser Engraving Cutting Machine. Laser power:60w/80w/100w/130w/150w.

Tool Type: Cutting Machine ; Engraving Method: CO2 Laser ; MPN: Does Not Apply ; Max Cutting Speed: 0-30000mm/min ; Repeat Positioning Accuracy: ≤±0.01mm

1-Mixed metal cutting machine 1390,specialized in cutting stainless steel,carbon steel,MDF,die board and wood.

2-The Sunna cutting speed of 1mm stainless steel is 30mm/s,20mm acrylic with prefect cutting quality.

3-X/Y adopt Leadshine servo motor with high precision belt transmission greatly improve the response speed and cutting precision of equipment, extend the time of using

4-The Sunna cutting section with good quality:Mechanical follow-up cutting head system, cutter head always follows the material to keep the cutting point location unchanged, which insures smooth cutting section without processing again. It can adapt to flat or curved surface sheet cutting.

5-Adopt sealed co2 laser tube , main consumable items are electric energy,water-cooling, auxiliary gas and laser light.

6-Machine easy to operate, stable laser device and low maintenance cost.

7-Advanced RD control system, with professional motion control chip, has the function of consecutively high-speed curve cutting and the shortest path selection, which largely improves your working efficiency.

• Sunna Good quality RECI Brand laser tube,long life time and more powerful light. With good quality water cooling system to make the laser tube work better.
• Mechanical follow-up cutting head system, cutting head always follows the material to keep the cutting point location unchanged, which insures smooth cutting section without processing again.
• Sunna High quality alloy guide rails ,anti-wear,high precision,fast speed and reduced deformation. High precision motor ensure high precision in the process of engraving.
• RD control system:there has the USB interface in the control panel, do not need to connect into the computer, supporting offline work, very convenient.

Applicable industry: Mainly used for advertising industry(stainless metal and carbon steel), sheet metal industry(carbon steel), packaging industry(die board) and so on.

Applicable materials: acrylic, stainless steel, carbon steel, MDF,die board.

1. All of co2 laser Machine will be fully-checked by our quality control department before the shipment.We guarantee all of machines have a two -years warranty.

2. Training details: operation principles, system and structure, safety and maintenance, software the processing technique, and so on.

3. Numerous feedback from our clients have proven that our laser machines are stable in performance with rare malfunction. However, we would like to handle it as follows function occurs:

a.We guarantee that we will give you a clear reply within 24 hours.

b. Customer service staff will assist and guide you to analyze the malfunction in order to locate the cause.

c. If the malfunction is caused by improper operation on software and other soft faults, we will help solve the problem online.

d.We will offer plenty of online supports, just like detailed technical and installation instructions by email,video, whatsapp,wechat (Training by team viewer)

Metal Mix CO2 Laser Cutter 1390 300W Laser Cutting Machines. Product name: Mixed Cutting Machine C02 Laser Engraving Cutting Machine. Laser power:60w/80w/100w/130w/150w.

Tool Type: Cutting Machine ; Engraving Method: CO2 Laser ; MPN: Does Not Apply ; Max Cutting Speed: 0-30000mm/min ; Repeat Positioning Accuracy: ≤±0.01mm