How to maintain CNC oscillating knife cutting machine?

Oscillating knife cutting machine is more and more widely used in flexible material processing, but regardless of the various problems that may occur during long-term use, we need to maintain the machine in daily use to extend its service life. So how to maintain and care for the oscillating knife cutting machine?

1. the rotating parts of the cutting head should be inspected regularly and irregularly, and the wearing parts should be monitored in real time and replaced regularly.

2. Thoroughly clean the machine every week, clean the horizontal guide, vertical guide, drive rack and add lubricating oil.

3. Check whether the horizontal and vertical cutting heads are working properly. If there is any abnormality, please identify the cause promptly. If you cannot solve the problem by yourself, you must contact professional technicians.

4. check whether all cutting tools are loose, clean the rubbish on the cutting head and keep the rotating tools in normal position.

5. For automatic height adjustment device, check its sensitivity and tighten the blade several times before cutting to make the air pressure more stable.

6. Check if the blade is too long or too short, and make sure the distance between the two ends of the stopper is the same. If the blade is too long or too short, it is not conducive to proper cutting work.

7. Check the dust removal situation every working day, clean the dirt on the machine tool and guideway, keep the machine bed clean and maintained in place, turn off the air source and power supply after work, and discharge the residual air in the machine tool pipeline.

The above is the introduction of CNC oscillating knife cutting machine. For more information, you can communicate with us online, SUNNA's professional sales team will be based on your cutting needs, to recommend the right CNC knife cutting equipment.