Home > Products > Laser Cutting Machine > Fiber Laser Cutting Machine > Fiber Laser Pipe Cutting Machine for Metal Sheet
Fiber Laser Pipe Cutting Machine for Metal Sheet
  • Fiber Laser Pipe Cutting Machine for Metal SheetFiber Laser Pipe Cutting Machine for Metal Sheet
  • Fiber Laser Pipe Cutting Machine for Metal SheetFiber Laser Pipe Cutting Machine for Metal Sheet
  • Fiber Laser Pipe Cutting Machine for Metal SheetFiber Laser Pipe Cutting Machine for Metal Sheet

Fiber Laser Pipe Cutting Machine for Metal Sheet

SUNNA INTL is Fiber Laser Pipe Cutting Machine for Metal Sheet manufacturer and supplier in China who can wholesale fiber laser cutter. We can provide professional service and better price for you. If you interested in fiber laser pipe cutting machine products, please contact with us. We follow the quality of rest assured that the price of conscience, dedicated service.

Send Inquiry    PDF DownLoad

Product Description

SUNNA INTL is a manufacturer and supplier of fiber laser pipe cutting machine in China. The fiber laser pipe cutters are used for cutting sheet metal and tubes and are available in both open and closed series. The power consumption of a fiber laser is solely 20% to 30% of that of a CO2 laser. The increased electrical efficiency of fiber lasers significantly reduces the strength consumption of fiber laser systems, saving electrical energy expenses and reducing the initial investment in electrical equipment. The effectivity of a fiber laser some distance exceeds that of a YAG or CO2 laser, with an predicted lifetime of higher than 100,000 hours of non-stop or pulsed operation. And the beam of a fiber laser is capable to cut reflective metals with much less energy, as the laser is absorbed into the metal being cut. If you are fascinated in our fiber laser tube cutter products, please contact us. We observe the ideas of assured fantastic and conscientious pricing and are completely satisfied to serve you.

The advantages of fiber laser cutting machine

Power consumption of fiber laser is only 20%~30% of CO2 laser. The increased electrical efficiency of fiber laser greatly reduces the power consumption of the fiber laser system, saving electricity costs and reducing the initial investment in electrical equipment.

The efficiency of a fiber laser far exceeds YAG or CO2 laser.

The projected lifetimes of fiber laser is greater than 100,000 hours of continuous or pulsed operation.

The fiber laser beam is capable of cutting reflective metals with much less energy as the laser is absorbed into the metal being cut.

1. Fiber Laser Pipe Cutting Machine for Metal Sheet Introduction

2. Product Parameter (Specification)

Model SN-1530F
Transmission TAIWAN RAIL AND RACK
Control Software Cypcut Control System
Cutting accuracy 0.01mm
Fiber Laser Head Raytools Cutting head
Gross Power 15KW
Machine Weight 14000KG
Voltage 380V
Laser Type Fiber Laser
Working Area 3000x1500mm , 6meters
Air Supply O2, N2, AIR
Cooling System WATER COOLING
Driving System YASKAWA SERVO MOTOR
Automatic Grade Automatic
Phase Three phase
Acceleration Speed 1G
Application Mild Steel, Carbon Steel, Stainless Steel, Aluminum, Brass sheet tube cutting
Cutting Thickness 12mm MS, 5mm SS, 3mm Alunminum brass
Power Source MAX
Working Speed 140m/min
Autofocus Yes

What is the Maximum Cutting Thickness ?

1KW 1.5KW 2KW 3KW 4KW
CS(mm) 0.4-12 0.4-16 0.4-18 0.4-20 0.4-25
SS(mm) 0.4-5 0.4-6 0.4-8 0.4-12 0.4-12
Aluminum (mm) 0.4-3 0.4-5 0.4-6 0.4-8 0.4-12
Brass (mm) 0.4-3 0.4-5 0.4-6 0.4-6 0.4-8

3.Fiber Laser Pipe Cutting Machine for Metal Sheet Feature

1--Raycus fiber lasers source, high and stable function, lifespan is over 100000 hours

2--Perfect cooling system, lubrication system, and dust removal system: make sure fiber laser cutter can operate more stably, efficiently, and durably.

3--Professional CAD / CAM automatic programming software and automatic nesting software: it is possible to maximally save raw materials.

4--Sunna High Efficiency for photoelectric conversion: Compare with the CO2 laser cutters, fiber laser cutting machines have three times photoelectric conversion efficiency.

5--Affordable Cost: Save energy and protect the environment. The photoelectric conversion rate is up to 25-30%. Low electric power consumption, it is only about 20%-30% of traditional CO2 laser cutting machine.

6--Low Maintenance: fiber line transmission no need to reflect lens, save maintenance cost;

7--Easy Operations: fiber line transmission, no adjustment of the optical path.

8--Tube choose 3m or 6m tube you can choose.

4. Fiber Laser Pipe Cutting Machine for Metal Sheet Main Parts Introduction

CAST-IRON BED, ANTI-VIBRATION, STABLE, NO DEFORMATION

(1)--The Sunna main frame adopts the gantry structure welded by all steel plates to ensure the long-term stability without deformation.

(2)--Improve the stability and rigidity of the Y-axis beam.

(3)--Using gantry rack double guide rail, double servo drive structure.

(4)--Ensure the high precision and high dynamic performance of Y-axis beam movement. (5)--Y-axis beam runs smoothly at high speed, greatly reducing gas consumption.

SERRATE WORKING PLATFORM

(1)--The Sunna steel serrated table can withstand heavier work pieces and has only a small area to touch the workpiece when cutting,

maximizing the melting of the table surface by the heat of the laser.

(2)--Each piece is independent for easy replacement and maintenance.

CYPCUT CONTROL SYSTEM

(1)--Support AI, DXF, PLT, Gerber, LXD and other formats, and accept the Cyput international standard G code generated by MaterCam, Type3, Wentai and other software.

(2)--To use the easiest way to set the lead, slotted compensation, micro connection, bridge-connection, lead inside or outside, lead seal without gap and so on.

GEARS, RACKS, GUIDES

(1)--The Sunna guide rail and rack are calibrated by a precision collimator with an accuracy of ±0.02mm

(2)--Using Taiwan YYC rack, grinding on all sides. And there is a positioning pin design to prevent the rack from shifting

(3)--Using Taiwan HIWIN guide rail, and use oblique pressure block design to prevent displacement of guide rail

SWITZERLAND RAYTOOLS AUTO-FOCUS LASER CUTTING HEAD

(1)--AUTOFOCUS: Through the built-in drive unit of the servo motor, the focusing lens is driven by the linear mechanism to automatically change the position in the focusing range.

(2)--EFFICIENT: Reading the saved cutting parameters through the operating system can quickly change the focus position of the laser head, eliminating manual operation and improving efficiency by 30%

FAMOUS BRAND LASER SOURCE

(1)--We Sunna have professional sales and technician who can suggest you the most suitable laser source, depending your target price.

(2)--Stable performance and high cost performance

(3)--The Sunna fiber launch is stable, with long service life of nearly 100,000 hours

(4)--It can run continuously 24 hours a day to meet the requirements of industrial continuous production

CONTROL CABINET

All the electrical components are housed and wired in a doubled-doored electrical enclosure. This allows for easy access and service when needed. All wiring is tagged so that when service is required, the customer can easily navigate the cabinet

HIGH QUALITY SERVO MOTOR

Composed of: servo drives and the servos move in all axes.With this motor, the machine can realize high-precision machining at high speed.

WATER CHILLER

The function of the water cooler is to reduce the temperature of the laser generator and prevent the laser from being burned out.We only use brand-name water coolers with reliable quality.

5. Application

Fiber Laser Pipe Cutting Machine is suitable for stainless steel, carbon steel, silicon steel, aluminum alloy, titanium alloy, galvanized steel, pickle plate, aluminum-plating Zinc plate, metallic copper and other metals.

Specially used for cutting 0.5-30mm carbon steel sheets (pipes), 0.5-15mm stainless steel sheets, galvanized steel(pipes), electrolytic zinc-coated steel sheet(pipes), silicon steel(pipes) and other kinds of thin metal sheets and pipes. Range of pipe diameters: 20-220mm.

Fiber Laser Cutting Machine After Sales Service:

A.SUNNA INTL will supply fiber laser cutters with training videos and user's manuals in English for installing, operation, maintenance and trouble-shooting, and shall give technical guide by e-mail,whatsapp,wechat,telegram,teamviewer,telephone and so on, when you meet some problems of installation, using or adjusting.

B.You can come to our factory for training. SUNNA will offer professional guide. Direct and effective face-to-face training. Here we have assembled equipments, all sorts of tools and testing facility,we will also provide accommodation during training period. Training Time: 1-10 working days.

C.Engineers service machinery overseas

ODM/OEM customized projects allocate sufficient resources to ensure the first response, efficient collaboration with customers, shorten the research and development cycle, and help customers quickly realize product marketization.

MQ:1 SETS

Wholesale Fiber Laser Pipe Cutting Machine for Metal Sheet & Pipe Fiber Laser Cutting Machine with 2 Years Warranty

process tubes length: up to 6m

process tubes diameter: 20mm to 200mm

sheet metal formats:1.5×3m, 1.5×4m, 1.5×6m, 2×4m, 2×6m

fiber laser source: 1000W ~ 4000W

machinable materials: mild steel, stainless steel, aluminium, copper, brass,etc.

Hot Tags: Fiber Laser Pipe Cutting Machine for Metal Sheet, China, Factory, Manufacturers, Suppliers, Wholesale, Customized, In Stock, Cheap, Low Price, Price, CE, 2 years warranty, Newest, Discount

Related Category

Send Inquiry

Please feel free to give your inquiry in the form below. We will reply you in 24 hours.