Home > Products > Laser Cutting Machine > Fiber Laser Cutting Machine > Economical 1500W Sheet Metal Cutting CNC Fiber Laser Cutter
Economical 1500W Sheet Metal Cutting CNC Fiber Laser Cutter

Economical 1500W Sheet Metal Cutting CNC Fiber Laser Cutter

SUNNA Economical 1500W Sheet Metal Cutting CNC Fiber Laser Cutter is a fully automatic CNC laser metal cutting system with the characteristics of high quality, high speed, high precision and high efficiency. It is specially designed for all kinds of metal processing and is your good partner in metal processing. SUNNA Economical 1500W Sheet Metal Cutting CNC Fiber Laser Cutter is equipped with different power lasers (can be customized according to your needs), which can cut carbon steel, stainless steel, electrical steel, tool steel, galvanized steel, mild steel, aluminum-zinc plate, aluminum alloy, aluminum, titanium Alloy, brass, copper, iron and other metal sheets and metal tubes of different thicknesses.

Send Inquiry

Product Description

The Economical 1500W Sheet Metal Cutting CNC Fiber Laser Cutter focuses the laser light emitted by the laser into a high power density laser beam through the optical path system. The laser beam is irradiated on the surface of the workpiece, causing the workpiece to reach the melting point or boiling point, and at the same time, the high-pressure gas coaxial with the shaft blows away the molten or vaporized metal. When the relative position of the laser beam and the workpiece moves, a slit will be formed in the material, thereby achieving the purpose of cutting. SUNNA Economical 1500W Sheet Metal Cutting CNC Fiber Laser Cutter has the characteristics of high precision, fast cutting speed, no restrictions on cutting patterns, automatic typesetting to save materials, smooth incision, and low processing cost. The mechanical part of the laser cutter head has no contact with the workpiece and will not scratch the surface of the workpiece during operation. Laser cutting is fast. The incision is smooth and flat, and generally does not require subsequent processing; the cutting heat-affected zone is small, the plate deformation is small, and the slit is narrow. There is no mechanical stress in the incision and no shear burrs. SUNNA Economical 1500W Sheet Metal Cutting CNC Fiber Laser Cutter has the advantages of high processing precision, good repeatability, and no damage to the material surface.

High Power Large Fiber Laser Cutting Machine Parameter (Specification)

Model SN-4020F
Transmission TAIWAN RAIL AND RACK
Laser Power 1.0kw 1.5kw 2.0kw 3.0kw 4.0kw 6.0kw, 8.0kw, 12.0kw
Working Area SN3015F - 5'W x 10'L
SN4020F - 6'W x 13'L
SN6020F - 6'W x 20'L
Control Software Cypcut Control System
Cutting accuracy 0.01mm
Fiber Laser Head Raytools Cutting head
Gross Power 15KW
Machine Weight 14000KG
Voltage 380V,50Hz
Cutting Gas Compressed air, oxygen, nitrogen
Cooling System WATER COOLING
Driving System YASKAWA SERVO MOTOR
Automatic Grade Automatic
Phase Three phase
Max. Acceleration 1.5G
Application Mild Steel, Carbon Steel, Stainless Steel, Aluminum, Brass sheet tube cutting
Power Source Raycus/IPG/MAX
Max Running Speed 4000 IPM | 6000 IPM (Optional)
Max.Cutting Speed 30,000mm/min
Autofocus Yes
Cutting Thickness 0 to 20mm (mild steel)
Support File Extension Plt, bmp,dxf, jpg, tif, ai
Package Dimension 1 x 40GP
Gross Weight 2500KGS

What is the Maximum Cutting Thickness ?

1KW 1.5KW 2KW 3KW 4KW
CS(mm) 0.4-12 0.4-16 0.4-18 0.4-20 0.4-25
SS(mm) 0.4-5 0.4-6 0.4-8 0.4-12 0.4-12
Aluminum (mm) 0.4-3 0.4-5 0.4-6 0.4-8 0.4-12
Brass (mm) 0.4-3 0.4-5 0.4-6 0.4-6 0.4-8

Industrial Fiber Laser Cutter for metal main feature

1. In the industrial fiber laser metal cutting machine, Raycus generator laser device with stable performance is used; the key parts can last 100,000 hours.

2. A sophisticated CNC control system that can directly read.ai,.plt,.dxf,.lxd, and ug code and is simple to use;

3. Intelligent cutting head with auto-height adjustment for consistent focal length and cutting quality.

4. High precision transmission device imported from Japan that works flawlessly with the servo system, ensuring cutting precision and efficiency.

Industrial Fiber Laser Cutter for metal main parts

  • CAST-IRON BED, ANTI-VIBRATION, STABLE, NO DEFORMATION

    --The main frame adopts the gantry structure welded by all steel plates to ensure the long-term stability without deformation.

    --Improve the stability and rigidity of the Y-axis beam.

    --Using gantry rack double guide rail, double servo drive structure.

    --Ensure the high precision and high dynamic performance of Y-axis beam movement.

    --Y-axis beam runs smoothly at high speed, greatly reducing gas consumption.

  • SERRATE WORKING PLATFORM

    --The steel serrated table can withstand heavier work pieces and has only a small area to touch the workpiece when cutting, maximizing the melting of the table surface by the heat of the laser.

    --Each piece is independent for easy replacement and maintenance.

  • CYPUT CONTROL SYSTEM

    --Support AI, DXF, PLT, Gerber, LXD and other formats, and accept the Cyput international standard G code generated by MaterCam, Type3, Wentai and other software.

    --To use the easiest way to set the lead, slotted compensation, micro connection, bridge-connection, lead inside or outside, lead seal without gap and so on.

  • GEARS, RACKS, GUIDES

    --The guide rail and rack are calibrated by a precision collimator with an accuracy of ±0.02mm

    --Using Taiwan YYC rack, grinding on all sides. And there is a positioning pin design to prevent the rack from shifting

    --Using Taiwan HIWIN guide rail, and use oblique pressure block design to prevent displacement of guide rail

  • SWITZERLAND RAYTOOLS AUTO-FOCUS LASER CUTTING HEAD

    --AUTOFOCUS: Through the built-in drive unit of the servo motor, the focusing lens is driven by the linear mechanism to automatically change the position in the focusing range.

    --EFFICIENT: Reading the saved cutting parameters through the operating system can quickly change the focus position of the laser head, eliminating manual operation and improving efficiency by 30%

  • FAMOUS BRAND LASER SOURCE

    --We have professional sales and technician who can suggest you the most suitable laser source, depending your target price.

    --Stable performance and high cost performance

    --The fiber launch is stable, with long service life of nearly 100,000 hours

    --It can run continuously 24 hours a day to meet the requirements of industrial continuous production

  • CONTROL CABINET

    All the electrical components are housed and wired in a doubled-doored electrical enclosure. This allows for easy access and service when needed. All wiring is tagged so that when service is required, the customer can easily navigate the cabinet

  • HIGH QUALITY SERVO MOTOR

    Composed of: servo drives and the servos move in all axes.With this motor, the machine can realize high-precision machining at high speed.

  • WATER CHILLER

    The function of the water cooler is to reduce the temperature of the laser generator and prevent the laser from being burned out.We only use brand-name water coolers with reliable quality.

Applicable Industry and Materials

Fiber Laser Stainless Steel Cutting Machine is suitable for stainless steel, carbon steel, silicon steel, aluminum alloy, titanium alloy, galvanized steel, pickle plate, aluminum-plating Zinc plate, metallic copper and other metals.

Specially used for cutting 0.5-30mm carbon steel sheets (pipes), 0.5-15mm stainless steel sheets, galvanized steel(pipes), electrolytic zinc-coated steel sheet(pipes), silicon steel(pipes) and other kinds of thin metal sheets and pipes. Range of pipe diameters: 20-220mm.

Fiber Laser Cutting Machine After Sales Service:

A.SUNNA INTL will supply fiber laser cutters with training videos and user's manuals in English for installing, operation, maintenance and trouble-shooting, and shall give technical guide by e-mail,whatsapp,wechat,telegram,teamviewer,telephone and so on, when you meet some problems of installation, using or adjusting.

B.You can come to our factory for training. SUNNA will offer professional guide. Direct and effective face-to-face training. Here we have assembled equipments, all sorts of tools and testing facility,we will also provide accommodation during training period. Training Time: 1-10 working days.

C.Engineers service machinery overseas

The working dimension and laser electricity of the SUNNA Industrial Fiber Laser Cutting Machine for metal can be custom-made in accordance to client needs. This Industrial Fiber Laser Cutting Machine for metal is the first-class preference for processing complicated steel parts. It can now not solely technique metallic sheets with excessive velocity and excessive precision, however additionally technique metallic pipes for precision cutting. This Industrial Fiber Laser Cutting Machine for metal is broadly used in auto parts, robotic parts, rocket parts, plane parts, ship parts, domestic equipment parts, metallic tools, engineering equipment parts, agricultural equipment parts, steel decoration, metallic furniture, kitchen countertops, Kitchenware, health tools and different industries.

Hot Tags: Economical 1500W Sheet Metal Cutting CNC Fiber Laser Cutter, China, Factory, Manufacturers, Suppliers, Wholesale, Customized, In Stock, Cheap, Low Price, Price, CE, 2 years warranty, Newest, Discount

Related Category

Send Inquiry

Please feel free to give your inquiry in the form below. We will reply you in 24 hours.